Olympus EM10 - Manual (Page 65)

65 EN
Using shooting options
6
Sequential shooting/using the self timer
Keep the shutter button pressed all the way down to take a series of photos.
Alternatively, you can take pictures using the self timer.
1 Press the Q button to select sequential shooting/self timer.
P
Single
WB
AUTO
WB WB WB
AUTO AUTO AUTO
L N
4:3
S-IS AUTO S-IS AUTO
FullHD
F
o o T T S S Y12s Y12s Y2s Y2s Yc Yc 250 250 F5.6
i
NORM
ISO
AUTO
AUTO
WB
AUTO
4:3
01:02:03 01:02:03
1023 1023
j Y
When shooting using the
viewfi nder
When shooting using live
view
Sequential
shooting/
self timer
• If you assign [Direct Function] to the arrow pad, you can press G to display the
options.
g [Button Function] (P. 99)
2 Select the shooting mode using the front dial and press the Q button.
o
Single-frame
shooting Shoots 1 frame at a time when the shutter button is pressed
(normal shooting mode, single-frame shooting).
T Sequential H
Photographs are taken at about 8 frames per second (fps) while
the shutter button is pressed all the way down. Focus, exposure,
and white balance are fi xed at the values for the fi rst shot in each
series.
S Sequential L
Photographs are taken at about 3.5 frames per second (fps)
while the shutter button is pressed all the way down. Focus and
exposure are fi xed according to the options selected for [AF
Mode] (P. 72) and [AEL/AFL] (P. 97).
Y12s
Self-timer
12 SEC
Press the shutter button halfway to focus, the rest of the way
down to start the timer. First, the self-timer lamp lights up for
approximately 10 seconds, then it blinks for approximately 2
seconds and the picture is taken.
Y2s
Self-timer
2 SEC
Press the shutter button halfway to focus, the rest of the
way down to start the timer. The self-timer lamp blinks for
approximately 2 seconds, and then the picture is taken.
YC
Custom Self-
timer
You can set the self-timer time, number of photographs, and
interval between photographs. Select g, press the
INFO button,
and rotate the rear dial. Use the front dial to select an option.
$ Notes
• To cancel the activated self-timer, press G.
# Cautions
• When you are using S, no confi rmation image is displayed during shooting. The
image is displayed again after shooting ends. When you are using T, the image shot
immediately before is displayed.
• The speed of sequential shooting varies depending on the lens you are using and the
focus of the zoom lens.