Water leakage test – Olympus PT-EP03 User Manual
Page 15
EN 14
En
Water Leakage Test
The final test after loading the camera is explained below. Always perform this test. It can be performed
easily in a water tank or a bathtub. The required time is about five minutes.
• At first, immerse the Case for only three seconds and check that no water drop etc. to the Case.
• Next, immerse the Case for 30 seconds and check that no water drop etc. to the Case.
• Furthermore, immerse the Case for three minutes.
• Check followings:
- check that no water has accumulated the Case.
- check that the Case is not clouded.
- check that no water has entered the Case.
• If inside of the Case becomes cloudy or there is a water drop, do the maintenance of the O-ring and
perform the water leakage test again.
PT-EP03_EN.Book Page 14 Wednesday, October 13, 2010 11:28 AM