Handling after shooting – Olympus UFL-1 User Manual
Page 23
Advertising
EN 23
EN
6. Handling After Shooting
Wiping off any waterdrop
Removing the batteries
1
Remove the battery cap and take out the batteries.
2
After removing the batteries, be sure to replace the battery cap.
After underwater shooting, remove
any drops of water from the flash.
Use pressurized air or a soft, lint-
free cloth to carefully wipe away any
moisture from the battery cap and
the switches.
CAUTION
• Waterdrops may spill into the flash when the battery cap is removed,
especially when they remain between the flash and the battery cap. Take
special care to wipe off all waterdrops.
1
2
UFL-1_EN.book Page 23 Tuesday, February 20, 2007 6:09 PM
Advertising