Olympus UFL-1 User Manual

Page 5

Advertising
background image

EN 5

EN

z

Do not place this product at locations with abnormally high or
abnormally low temperatures or at locations with extreme temperature
changes. The product may deteriorate or may cause a fire.

z

Do not alter the battery compartment or try to insert any foreign objects into it.

z

Do not store the flash at the locations subject to vibrations. It may cause
malfunction.

z

Opening and closing at locations with sand, dust, or dirt may impair the
waterproof characteristic and cause water leakage. This should be
avoided.

z

This product has been designed and manufactured for use at a water
depth within 40 m. Please note that diving at depths in excess of 40 m
may cause deformation or damage to this product. In this case, water
penetration may occur.

z

Rough handling, such as jumping into the water with the flash in your
hand or in an outside pocket or throwing the flash into the water could
lead to water penetration. Please always take care when handing it
from hand to hand etc.

z

Before traveling by air, please make sure to remove the O-ring, otherwise
the difference in air pressure may make it impossible to open the flash.

Battery handling precautions

Follow these important guidelines to prevent batteries from leaking,
overheating, burning, exploding, or causing electrical shocks or burns.

DANGER

z

Never heat or incinerate batteries. It could cause a fire or an explosion etc.

z

Never contact terminals (+) and (-) with metal.

z

Take precautions when carrying or storing batteries to prevent them
from coming into contact with any metal objects such as jewelry, pins,
etc. It may cause burns and an injury by short circuit.

z

Never store batteries where they will be exposed to direct sunlight, or
subjected to high temperatures in a hot vehicle, near a heat source, etc.
It may cause burns or an injury by battery fluid leaks, overheating or an
explosion.

z

Do not use solder, transform, modify or dismantle the batteries. There
is the risk of destroying the terminal safety valve and the scattering of
internal contents. It may cause a fire or an explosion.

UFL-1_EN.book Page 5 Tuesday, February 20, 2007 6:09 PM

Advertising