Olympus UFL-2 - Manual (Page 21)

EN 21
EN
Connecting to a camera’s underwater case
There are two ways to connect the flash to a camera’s underwater case.
To learn what connection method to use, refer to the instruction manual
that comes with your camera’s underwater case.
Connecting using an underwater fiber optic cable (optional)
• Insert the plugs of the underwater fiber optic cable into the connector
on the camera’s underwater case and on the flash’s fiber optic cable
connector, all the way in until they stop.
• You can connect and disconnect the underwater fiber optic cable while
under water.
• For further details, refer to the instruction manuals of the underwater
fiber optic cable (optional) and the camera’s underwater case.
r2090_e_00.book Page 21 Thursday, May 1, 2008 6:29 PM