Brother PT-9400 User Manual
Page 75
68
ERROR MESSAGE LIST
MEMORY FULL
●
This message appears if you try to
store a message that is too large to
fit in the available memory space
(maximum of 3,000 characters).
●
Delete an unwanted file to
make space for the new
one.
MIN 4 DIGITS
●
This message appears if less than
the minimum four digits are entered
as the barcode data.
●
Enter a minimum of four
digits before pressing
.
NO FILES
●
This message appears if no files are
stored in the memory when you try
to recall or delete one.
●
Store a text file before try-
ing to recall or delete one.
NO PRINTING TEM-
PLATES ON IRON-
ON OR LETTERING
TAPE
●
This message appears if you try to
print a template on iron-on or letter-
ing tape.
●
Install a tape cassette that
does not contain iron-on
or lettering tape.
RAM PROBLEM
●
This message appears if there is a
problem with the machine’s mem-
ory.
●
Contact your service rep-
resentative.
ROM PROBLEM
●
This message appears if there is a
problem with the machine’s mem-
ory.
●
Contact your service rep-
resentative.
SET 3/8” TAPE
●
This message appears if a 3/8” (9-
mm)-wide tape cassette is not
installed when printing a label cre-
ated using a template for 3/8” (9-
mm)-wide tape.
●
Install a 3/8” (9-mm)-wide
tape cassette.
SET 1/2” TAPE
●
his message appears if a 1/2” (12-
mm)-wide tape cassette is not
installed when printing a label cre-
ated using a template for 1/2” (12-
mm)-wide tape.
●
Install a 1/2” (12-mm)-
wide tape cassette.
SET 3/4” TAPE
●
This message appears if a 3/4” (18-
mm)-wide tape cassette is not
installed when printing a label cre-
ated using a template for 3/4” (18-
mm)-wide tape.
●
Install a 3/4” (18-mm)-
wide tape cassette.
SET 1” TAPE
●
This message appears if a 1” (24-
mm)-wide tape cassette is not
installed when printing a label cre-
ated using a template for 1” (24-
mm)-wide tape.
●
Install a 1” (24-mm)-wide
tape cassette.
SET 1 1/2” TAPE
●
This message appears if a 1 1/2”
(36-mm)-wide tape cassette is not
installed when printing a label cre-
ated using a template for 1 1/2” (36-
mm)-wide tape.
●
Install a 1 1/2” (36-mm)-
wide tape cassette.
ERROR MESSAGE
CAUSE
SOLUTION
New Block