Bush Hog 2846 - Manual (Page 25)

F. Connect hydraulic hoses to loader as shown in
Figure 5-2. If optional hydraulic valve is used, refer
to paragraphs 5-2 and 5-3 for valve and stand
assembly instructions.
G. Install cuffs, pins, washers, bolts, and nuts as
shown depending on your particular model loader.
(Figure 5-3)
Figure 5-2 Tractor Hydraulic Kit
Straight Adaptor
1/2” NPT to 3/4” JIC
3/4”- 16 JIC Threads
(4) Hoses
Mainframe
To Tractor Outlets Through Quick Couplers
(Not Supplied)
24
Figure 5-3 Cuff Arrangements
NOTE:
HOSES COMING FROM MAINFRAME ARE
COLOR CODED FOR IDENTIFICATION.
Red - Rod End of Lift Cylinder
Blue - Head End of Lift Cylinder
Green - Head End of Bucket Cylinder
Yellow - Rod End of Bucket Cylinder
Figure 5-1 Parking Stands Installed
Cuff With Welded-On Bolt
Subframe
Cuff
Removable
Pin
Square Head Bolt
Subframe
Fixed
Pivot Pin
LOADER MODELS
2426 QT, 3226 QT
LOADER MODELS
2446 QT, 2846 QT