Brocade Mobility RFS6000 Controller Installation Guide - Manual (Page 25)

Gigabit Ethernet on the Mobility RFS6000 Controller
4
Brocade Mobility RFS6000 Controller Installation Guide 17
53-1001573-03
Installing Gigabit Ethernet SFPs
1. Open the bail on the transceiver.
2. Insert the SFP transceiver into the corresponding port on the controller.
3. Once the SFP transceivers are properly seated in their ports, close the bails to
lock the transceivers in place.
Open bail to insert or remove
SFP transceiver