Brada Appliances YPL3-08C - Manual (Page 14)

14
End of season
·Please drain the water.
·Keep the unit running in Fan mode for two hours until the inside of the unit is dry.
·Turn off the unit and unplug it.
·Clean the air filter and after dry it thoroughly, reinstall it.
·Remove the exhaust pipes and keep them carefully.
·Wrap the unit with the plastic bag and keep it in a dry place.
TROUBLE SHOOTING
Before contacting professional service, check it first yourself referring to the followings:
Problem Cause Solution
The air
conditioner
does not
function.
No power supply.
Connect to power supply outlet and
switch on.
“FL” flashes on the display
screen
Drain water.
Timer-off is running.
You can turn on the unit three minutes
later.
The air
conditioner
restart
frequently
In direct sunlight. Close curtains.
Windows or doors open, many
people or a heat source in the
room.
Close doors and windows, remove the
heat source.
Dirty filter. Clean or replace the filter(s).
Air inlet or air outlet blocked. Remove the blockage.
The unit is too
noisy
Unit stands uneven.
Place on an even, solid surface (less
vibration).
No work of
compressor
Self protect of compressor
Wait for 3 minute and restart again
after the descend of temperature
Cautions: Switch off the unit and unplug it immediately if anything
abnormal happens. Then contact a qualified electrician.
Above data without advance notice for product improvement.