Pioneer VSX-C100-S - Manual (Page 44)

44
En
Using Other Functions
Input Signal Select
This button selects the type of input signal, ANALOG,
DIGITAL or AUTO, sent to the receiver. You need to take
special care to switch to the appropriate input when
necessary. For example, the switch would have to be on
DIGITAL to hear Dolby Digital or DTS surround sound
material but it would have to be on analog to record
from the ANALOG out jacks on the receiver. The default
setting is AUTO which chooses digital over analog when
both are available but goes with whatever is available if it
is the only choice.
1 Use the SIGNAL SELECT button to cycle
through the three input modes.
• If there are no digital inputs (see p.12–15), the
SIGNAL SELECT will default to AUTO.
• Set the SIGNAL SELECT to ANALOG if you want to
use the receiver for karaoke.
The SLEEP Function
Use this function to listen to the receiver and have it turn
off at a specified time without you having to do anything.
As is clear from the title this function is useful for
drifting off to sleep while listening to music.
1 Use the SLEEP button to cycle through the
three sleep time lengths (90 min., 60 min.,
and 30 min.) and set the sleep timer.
SOURCE RECEIVER
SLEEP
AUTO SURROUND
SIGNAL SELECT
ADVANCED
SOUND
MODE
DIMMER
SETUP
ENTER
TEST TONE CH_SELECT
ROOM
SETUP
MUTE
MASTER
VOLUME
DVD
DVR/ VCR
TV / SAT
F M / A M
FRONT
1
SOURCE RECEIVER
SLEEP
AUTO SURROUND
SIGNAL SELECT
ADVANCED
SOUND
MODE
DIMMER
SETUP
ENTER
TEST TONE CH_SELECT ROOM
SETUP
MUTE
DVD
DVR/ VCR
TV / SAT
F M / A M
FRONT
1
SEL. ANA
SEL. DIG
SEL. AUTO
• When the SLEEP timer has been set, or is active, a dot
indicator will appear in the display (to the left of the
volume indicator).
• Press the SLEEP button once to view how much time
is left on the timer before shutdown. Each press after
that will cycle through the possible SLEEP time
lengths.
SLEEP indicator
Resetting the System
Use this feature to reset the system to its factory default
settings.
1 Press the TV/SAT button and the FRONT
button at the same time for five seconds to
return all of the settings to their default
mode.
• If the receiver is disconnected from a power source
for more than a month, or the main power is turned
off, it will reset to the default settings.
• The above reset doesn’t affect the presets that you
have programmed into the remote control (see page
46-47).
• The receiver resets to STANDBY.
1 1
R DOWN UP
AUDIO/ VIDEO MULTI-CHANNEL RECEIVER VSX-C100
2 ADVANCED SOUND
MODE
DVD FM/AM FRONT
MASTER
VOLUME
DVR/VCR TV/SAT
NES
TUAL
URROUND MODE
PRO LOGIC II