Pioneer DJM-2000NXS - Manual (Page 22)

22 En
 Using the beat sync function between multiple DJ
players for playback
When the beat grids of music files detected and adjusted using rekordbox are used,
the sound can be mixed synchronizing the tempos (BPM) and beats of multiple
DJ players (e.g. CDJ-2000nexus) connected by PRO DJ LINK or of the left and right
decks (e.g. XDJ-AERO, XDJ-R1).
! For instructions on using the beat sync function on DJ players, see the operating
instructions of the respective DJ players.
 Playing back on a DJ player by using hot cues
The hot cues (A, B and C) stored for music files can be called out on DJ players (e.g.
CDJ-2000nexus, CDJ-2000 or XDJ-R1) and played.
! For instructions on using the hot cues (A, B and C) stored for music files on DJ
players, see the respective DJ players’ operating instructions.
! For some DJ players (e.g. CDJ-2000nexus, XDJ-R1), when a music file is selected
and loaded onto the DJ player, the hot cues (A, B and C) stored for the music
file can be simultaneously loaded, forcibly replacing the DJ player’s hot cues (A,
B and C) (
l Prepare Hot Cue Auto Load setting for CDJ use (on import) on page
27).
! To use combinations of hot cues (A, B and C) of different music files for play-
back, a hot cue bank list must be created and transferred to a USB device.
Transferring playlists to USB devices
1 Click .
The [Device] pane is displayed on the browser panel.
2 Click to the left of the to where you want to
transfer the playlist, and then click to the left of the
[Playlists] folder.
3 Click on the right of .
The [Device] and [Playlist] panes are displayed on the left and right of the browser
panel respectively.
4 Drag Playlist from the [Playlist] pane to the [Device] pane.
The playlist and the music files contained in it are transferred to the USB device.
! Playlists can also be transferred by dragging them from the [Bridge] pane to the
[Device] pane.
! To delete the playlist from the USB device, select the playlist in the [Device]
pane, then press the [Delete] key on the computer’s keyboard.
Depending on the DJ player to which the USB device is connected for playback,
there may be restrictions on the names of playlists and the folder structure on the
USB device. For the restrictions that may apply when connecting USB devices
for playback, see the operating instructions of the respective DJ player (e.g. MEP-
4000, XDJ-R1).
Transferring hot cue bank lists to USB devices
To use combinations of hot cues (A, B and C) of different music files for playback,
a hot cue bank list must be created ahead of time (
l Organizing Hot Cue by using
Hot Cue Bank List on page 19).
1 Click .
The [Device] pane is displayed on the browser panel.
2 Click to the left of the to where you want to
transfer the hot cue bank list, and then click to the left of
the [Hot Cue Bank Lists] folder.
3 Click on the right of .
The [Device] and [Hot Cue Bank List] panes are displayed on the left and right of the
browser panel respectively.
4 Drag Hot Cue Bank List from the [Hot Cue Bank List] pane
to the [Device] pane.
The hot cue bank list and the music files contained in it are transferred to the USB
device.
! To delete the hot cue bank list from the USB device, select the hot cue bank list
in the [Device] pane, then press the [Delete] key on the computer’s keyboard.
Disconnecting USB devices from the computer
1 Click .
The [Device] pane is displayed on the browser panel.
2 Click to the right of the icon you want to disconnect
from the computer.
3 Disconnect the USB device from the computer.
! The USB device can also be disconnected by right-clicking the corresponding
icon and selecting [Disconnect USB Device].
When [Create the library for] is set at the [Preferences] screen, is dis-
played at to the right of . When is clicked, creation of a library
exclusively for the MEP-4000 or XDJ-R1 begins. Wait until this finishes before
disconnecting the USB device from the computer (
l Create the library for on
page 28).