Pioneer BDP-450-K - Manual (Page 21)

21
En
02 Achieving better video and sound quality
When connecting one TV (or projector) and AV amplifier
to the player, connect in such a way that the video and
audio signals are transferred separately in order to
achieve higher quality video and sound.
Caution
• Make sure to set HDMI Mode to Separate (page 41).
• If the AV amplifier connected to the HDMI OUT (SUB)
terminal is also connected to a TV, the TV’s input may
switch automatically. If this happens, turn off the
control function with HDMI on the TV.
 BDP-150
Connecting video and
audio cables
Note
• Make the settings in the Setup Navigator menu
according to the type of cable connected (page 24).
• To output video signals from this player, connect
using a video cable (not including when connected
using an HDMI cable).
Connecting a TV using a
video/audio cable (BDP-150
only)
Caution
• Connect the player’s video output directly to
your TV.
This player supports the analog copy protection
technology. Therefore, the picture may not be
displayed properly if this player is connected to a TV
via a DVD recorder/video deck or when playing the
player’s output material that is recorded by a DVD
recorder/video deck. Furthermore, the picture may
not be displayed properly due to the copy protection
when the player is connected to a TV with a built-in
video deck. For details, contact the manufacturer of
your TV.
Note
• Video signals are output with a resolution of 480/576I
or 480/576P when this player is connected using a
video cable.
• Depending on the output video resolution setting, the
picture may not be output.
BDP-450’s rear panel
Match the
direction of the
plug to the
terminal and
insert straight.
HDMI cable
(commercially available)
AV receiver
or amplifier
TV
To HDM
I in
p
ut
ter
m
in
al
Direction of signal flow
BDP-150’s rear panel
To HDMI
input terminal
From HDMI
output
terminal
AV receiver
or amplifier
To HDMI input
terminal
TV
HDM
I ca
bl
e
(c
o
m
m
e
rc
ia
ll
y
av
ai
lab
le
)
Match the direction
of the plug to the
terminal and insert
straight.
Direction of signal flow
HD
M
I cab
le
(c
o
mmer
c
ia
ll
y
av
ail
ab
le
)
TV
BDP-150’s rear panel
Direction of
signal flow
White
Red
It is also possible to connect to
an AV receiver or amplifier.
Connect the audio signals using
an coaxial digital audio cable or
an audio cable (2 channels)
(page 22).
To video/audio input terminals
Vi
deo/
aud
io
c
a
bl
e
(
in
c
lu
d
e
d)
Yellow
BDP-450_VXE8_IBD_EN.book 21 ページ ２０１２年６月２２日 金曜日 午後２時１１分