Pioneer PDP-435HDE - Manual (Page 56)

14 Appendix
56
En
Code Message Check
SD04 Powering off. Internal temperature too high. Check if the ambient temperature of the Plasma Display is high.
Check temperature around PDP.
SD05 Powering off. Internal protection circuits activated, Check the speaker cable connections between the Plasma Display
Is there a short in speaker cable? and the speakers.
SD11 Powering off. Internal temperature too high. Check if the ambient temperature of the Media Receiver is high.
Check the temperature around media receiver.
Signal names for 15-pin mini D-sub connecter
15 14 13 12
9
11
10 8 7 6
5 4 3 2 1
(Front view)
Pin No. Signal name
1 R
2 G
3 B
4 Not connected
5 Not connected
6 GND (ground)
7 GND (ground)
8 GND (ground)
9 +5V
0 GND (ground)
- Not connected
= SDA
~ HD
! VD
@ SCL
• A Macintosh adaptor may be required for use with some
Macintosh computers.