Using an av input (av2) 20, When connecting the rear display, When using a rear display connected to – Pioneer AVIC-F50BT User Manual

Page 20: Rear video output, 02 connecting the system, Using an av input (av2)

Advertising
background image

Black plate (20,1)

Using an AV input (AV2)

The navigation unit

20 cm

Red, white
(AUDIO INPUT)

RCA cables
(sold separately)

Yellow
(VIDEO INPUT)

RCA connector

To video output

To audio outputs

External video
component
(sold separately)

! This mode is available when the setting of

video input 2 (AV2) is set to

“On”. (For de-

tails, refer to Operation Manual.)

When connecting the rear
display

The navigation unit

15 cm

RCA connector

Red, white, yellow
(REAR MONITOR
OUTPUT)

To video input

To audio inputs

Rear display with
RCA input jacks

RCA cables
(sold separately)

When using a rear display
connected to rear video output

WARNING

NEVER install the rear display in a location
that enables the driver to watch the video
source while driving.
This navigation system

’s rear video output is for

connection of a display to enable passengers in
the rear seats to watch the video source.

<CRD4736-A>20

Engb

20

Section

02

Connecting the system

Advertising
This manual is related to the following products: