Pioneer AVIC-F50BT - Manual (Page 24)

Black plate (24,1)
Before installing this
navigation unit
1 Remove the trim ring.
Extend top and bottom of the trim ring out-
wards to remove the trim ring.
Trim ring
2 Insert the supplied extraction keys into
both sides of the unit until they click into
place.
3 Pull the unit out of the holder.
Extraction key
Installation with the holder
1 Install the holder into the dashboard.
After inserting the holder into the dashboard,
select and bend the tabs appropriate to the
thickness of the dashboard material. (Install
this navigation unit as firmly as possible using
the top and bottom tabs. To secure this naviga-
tion unit, bend the tabs 90 degrees.)
Dashboard
Holder
2 Install this product into the holder.
Dashboard
3 Attach the trim ring.
Trim ring
<CRD4736-A>24
Engb
24
Section
03 Installation