Pioneer AVIC70S - Manual (Page 11)

10
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
Mobile Navigation Unit
AVIC-505
Power cord
Black, Orange, Red, Yellow
See Page 8.
Check the position of your vehicle's reversing
lamp (the one that lights up when the gearstick
is in reverse [R]) and find the reversing lamp
+ side lead in the trunk.
GUIDE ON
When combining this mobile navigation unit with a Pioneer vehicle
stereo, if the vehicle stereo has yellow/black leads (MUTE), connect
them to those leads. This way when the guidance audio is output and
when you operate the system by voice, the vehicle stereo is
automatically muted to reduce the vehicle stereo volume.
Yellow/Black
Note: On some model's reverse the + and -
leads for the backup lamp are reversed. Connect
the purple lead to the lead whose voltage
changes when the reverse gear is engaged.
REVERSEGEAR SIGNAL INPUT
This is connected so that the mobile navigation
system can detect whether the vehicle is moving
forwards or backwards. Always connect to the
reversing lamp primary lead.
Purple
Reversing lamp +
side lead.
Purple lead extension cord
Fuse resistor
Purple
Connection method
Clamp firmly with
needle-nosed pliers.
Clamp the reversing lamp
+ side lead.