Pioneer SC-LX81 - Manual (Page 13)

13
Application Operations (Continued)
1 Menu bar and menu icons
You can choose the following commands from the application menus.
File
Open Opens a file that has been saved on the PC (see page 17 ).
Close Closes a file.
Save
Save measurement data in a file (see page 16 ).
Save As
Receive Receives measurement data (see page 9 ).
Print Prints the current individual graph.
a
a. It is not possible to print or preview items that have not been received (items for which there is no
data).
Preview Displays a preview screen to show how the printed page will appear.
a
Exit Exits the application.
Display
The way in which the graphs are displayed can be changed.
Graph 2D : Displayed in two dimensions.
Graph 3D : Displayed in three dimensions.
(Reverb
display only)
The reverb characteristics graph display type can be changed.
Each Ch:
All the channels are displayed individually.
The graph for the listening environment’s reverb characteristics (before
calibration) is displayed with the “Each Ch” mode, allowing you to check the
reverb characteristics for the individual channels.
Pair Ch:
Composite reverb characteristics for the left and right pairs of the “Front”,
“Surround” and “Surr Back” channels are displayed. Use the “Pair Ch” mode to
display the graphs for the reverb characteristics after calibration.
Demo Displays 3D graphs with rotating.
a
a. To finish, reselect and uncheck the box.
Continue