Pioneer SC-LX81 - Manual (Page 36)

36
Troubleshooting (Continued)
Cause:
It is not possible to print reverb characteristics graphs displayed in the “ALL”
mode.
Print after selecting an individual channel or frequency graph.
Cause:
You may not properly use the application software not corresponding to your
receiver.
Check the model number of your receiver and use the application software corresponding to it.
Cause:
When the receiver is connected to your PC with a RS-232C cable, the power of
the receiver may be automatically switched on when you operate the PC.
Unplug the cable when not in use.
Reverb characteristics graph cannot be printed
Some functions in application operation cannot be used
The receiver causes a malfunction when it is connected to the PC with a RS-232C
cable
ALL
display
Continue