Pioneer SC-LX88-K - Manual (Page 8)

8
Connecting to a Wireless LAN Router (Manual setting version) (continued)
3
Using the USB feeder cable side of the supplied cable, connect the
Power port of this unit to the USB port of the computer.
The position of the USB port and what it is called differ depending on the device. If you are
not sure about the USB port, refer to the instruction manual for your device.
Front Back
USB
The USB port is a landscape or vertical port, as shown on the left.
*On some devices, it is indicated as “USB” or indicated by “
”.
4
Turn on the power of the computer.
ON
5
Check that on the top of the unit, the POWER and the LAN lamps light
and WLAN lamp flashes.
When the lamps light, wait for about 2 minutes and then proceed to the next step.
Lit
Lit
Flashes
Setting the Unit
1
Start the web browser.
2
In the address field, enter "192.168.2.249" and then press the <Enter>
key.
3
1 Enter "admin" for the user name and "1234" for the password.
2 Click [OK].
1
2
Tip
‡ If you cannot log in to the web settings screen, check that you have entered the characters
correctly.