Pioneer AVX-7600 - Manual (Page 10)

9
Connecting the Units
Fig. 6
Connection method
Clamp the lead. 1. 2. Clamp firmly with
needle-nosed
pliers.
CAUTION
Pioneer recommends the use of
a camera which outputs mirror
reversed images, otherwise
screen image may appear
reversed.
Fuse resistor
8 m
Extension lead (supplied)
Rear view camera
Violet/white
Of the two lead wires connected to the back
lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE
(R) position. This connection enables the unit to
sense whether the car is moving forwards or
backwards.
RCA cable
(sold separately)
Note:
• It is necessary to set to AV INPUT2 in SETUP when
connecting a rear view camera.
To video output
This product
Video input 2
(VIDEO 2/BACK CAMERA INPUT)
20 cm