Pioneer AS-BT100 - Manual (Page 8)

8
en
To listen to music
1 Connect this unit to the ADAPTER PORT of the supported device.
2 Turn on power to the supported device.
3 Perform Bluetooth pairing.
Register this unit and the device connected by Bluetooth wireless technology.
4 Connect to a device equipped with Bluetooth wireless technology.
Begin playback of music on the device connected to this unit with Bluetooth wireless
technology.
For details regarding pairing and operation, consult the operating
instructions for the device supported by this unit.
Caution
• When performing connections, always turn off power to the supported device first.
• In the event this unit does not operate properly, turn off power to the supported device,
then check its connections to this unit. Also, consult the operating instructions for the
supported device.
About Bluetooth wireless technology
• Bluetooth wireless technology is a short-range wireless technology designed to allow
communication between digital devices. Since radio waves are used, the
communicating devices do not need to be facing each other.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Pioneer Corporation is under license. Other
trademarks and trade names are those of their respective owners.
Glossary
• Pairing:
To preregister the devices to be connected using Bluetooth wireless technology.
• A2DP (Advanced Audio Distribution Profile)
A profile used to transmit audio using Bluetooth wireless technology.
• AVRCP (Audio/Video Remote Control Profile)
A profile used for remote control of an AV device using Bluetooth wireless technology.
• SCMS-T
A form of contents protection used by Bluetooth wireless technology.
AS-BT100_en.fm 8 ページ ２００９年３月５日 木曜日 午後９時５４分