Pioneer DEQ-P6600 - Manual (Page 18)

Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to LOW. Normally, leave the set-
ting at HIGH to ensure quality sound.
1 Touch A.MENU and INITIAL and then
touch NEXT.
2 Touch DIGITAL ATT.
3 Touch or to switch the digital at-
tenuator setting.
Touch to select low setting and LOW ap-
pears in the display. Touch to select high
setting and HIGH appears in the display.
Resetting the audio
functions
This function cannot be operated when DVH-
P7000R, DVH-P5000MP or AVH-P6500DVD is
connected to this unit.
You can reset all audio functions except vo-
lume.
1 Touch A.MENU and INITIAL and then
touch NEXT.
2 Touch AUDIO RESET.
3 Touch RESET.
Ready to reset. Are you sure? appears in the
display.
4 Touch RESET again to reset audio func-
tions.
The reset end was carried out. appears in
the display.
# To cancel resetting the audio functions, touch
CANCEL.
Initial Settings
En
18
Section
04