Pioneer RMX-1000-M - Manual (Page 4)

4 En
Part names and functions
1
9
a
2 3 4 5 6 7 8
1 Menu items
The menus are displayed here.
2 Sync button
This is used to load customized parameter data set with remixbox
onto the RMX-1000.
! The [Sync] button can only be used when the computer and
RMX-1000 are connected by USB cable.
! Sampled sound sources are not loaded.
3 Import button
This is used to import the customized parameter data and sampled
sound sources exported onto an SD memory card with the [Export]
button.
Customized parameter data and sampled sound sources can also be
imported into remixbox from an SD memory card inserted into the
computer or RMX-1000.
4 Export button
This is used to export the customized parameter data and sampled
sound sources to an SD memory card inserted into the computer or
RMX-1000.
! SD memory cards include a lock mechanism. Be sure to unlock it
when using the SD memory card.
5 Load button
This is used to open RSD files saved using the [Save] button and
load the customized parameter data.
If there is a sampled sound source folder in the same location as
where the RSD file is stored, the sampled sound sources are also
loaded.
! RSD is a file format exclusive to remixbox.
! RSD files include the customized parameter data and informa-
tion on the file paths to the sampled sound sources’ WAV files
and on the playback start and end positions.
6 Save button
This is used to store the data in an RSD file in a specified location.
When sampled sound sources are assigned to the sampler slots, the
sampled sound sources are saved simultaneously.
7 Effect Browser button
This is used to switch the display of the effect browser on and off.
With the effect browser, the effect parameter editing screen for a
settable effect item can be opened instantaneously by clicking on
the item.
8 Settings button
This is used to open the remixbox preference settings screen.
The preferences set when remixbox is launched can be changed
here.
9 Line browser
The level currently being edited is displayed here.
a Effect select area
When the mouse cursor is over the effect whose parameters you
want to edit, that effect section pops out.
When clicked, the effect section is selected and the parameter set-
tings screen appears.
The current parameter values are displayed on the parameter set-
tings screen.
! SCENE FX section (page 7)
! ISOLATE FX section (page 8)
! X-PAD FX section (page 9)
! RELEASE FX section (page 10)