Pioneer RMX-1000-M - Manual (Page 5)

5 En
Part
names
and
functions
Loading customized parameter data
onto the RMX-1000 (Sync)
Use this procedure to load customized parameter data created with
remixbox onto the RMX-1000.
1 Connect the RMX-1000 and computer by USB cable,
then launch remixbox.
! The [Sync] button cannot be used unless the RMX-1000 and com-
puter are connected by USB cable.
2 Create the customized parameter data on remixbox.
3 Click the [Sync] button.
The customized parameter data is loaded onto the RMX-1000.
After loading, [Syc] appears on the RMX-1000’s BPM display section.
The loaded customized parameter data can be checked when the RMX-
1000’s [SETTING] selector switch is set to the [USER] side.
Importing customized parameter
data loaded in the RMX-1000
(Update Setting)
Use this procedure to import the customized parameter data loaded in
the RMX-1000 to remixbox.
1 Connect the RMX-1000 and computer by USB cable,
then launch remixbox.
2 From remixbox’s menu items, click [Edit]>[Update
Setting].
The customized parameter data loaded in the RMX-1000 is imported to
remixbox.
! When the RMX-1000 is shipped from the factory, the same param-
eters are loaded for the [DEFAULT] and [USER] modes.
Exporting the customized
parameter data and sampled sound
sources to an SD memory card
(Export)
Use this procedure to export the customized parameter data and sam-
pled sound sources created with remixbox to an SD memory card.
1 Insert the SD memory card into the RMX-1000
connected to the computer by USB cable.
! If the computer is equipped with an SD memory card slot, it is
also possible to perform this procedure with the SD memory card
inserted into this slot.
2 Create the customized parameter data and sampled
sound sources on remixbox.
3 Click the [Export] button.
The [Export] window opens.
4 Select the type of data to be exported to the SD
memory card.
5 Select the drive to which the SD memory card is
connected.
6 Click the [OK] button.
The customized parameter data loaded on the SD memory card can be
checked when the SD memory card is inserted in the RMX-1000 and the
RMX-1000’s [SETTING] selector switch is set to the [USER] side.
! The sampled sound sources can be used whether the [SETTING]
selector switch is set to the [DEFAULT] or [USER] side.