Pioneer VSX-424-K - Manual (Page 17)

Connecting your equipment 2 2
17
4
37
6
Connecting an iPod
This receiver has a dedicated iPod/iPhone terminal that will
allow you to control playback of audio content from your iPod
using the controls of this receiver.
Note
• An iPod/iPhone can be connected to the receiver. For
details on supported models and versions of the respective
products, see Playing an iPod on page 24 .
 Switch the receiver into standby, and then use the iPod
cable to connect your iPod to the iPod/iPhone terminal on
the front panel of this receiver.
• For the cable connection, also refer to the operating
instructions for your iPod.
• When connecting an iPhone to this unit, keep the iPhone
at least 20 cm away from this unit. If the iPhone is kept
closer to this unit and a telephone call is received by the
iPhone, noise may be output from this device.
• iPod recharging occurs whenever an iPod is connected to
this unit. (Recharging is enabled only when the unit’s
power is turned on.)
• For instructions on playing the iPod, see Playing an iPod on
page 24 .
Note
• When the ARC function is ON and the receiver is
connected to a compatible TV with an HDMI cable, and you
switch the input of the TV when the receiver’s selection is
iPod/USB
input, the receiver may automatically switch to
TV . If this happens, switch the receiver’s input back to the
original input, or turn OFF the ARC function (see The HDMI
Setup menu on page 36 ).
Connecting a USB device
It is possible to listen to two-channel audio using the USB
interface on the front of this receiver.
 Switch the receiver into standby then connect your USB
device to the iPod/iPhone terminal on the front panel of this
receiver.
• This receiver does not support a USB hub.
• For instructions on playing the USB device, see Playing a
USB device on page 25 .
iPod/iPhone
USB cable that comes
with the iPod
This receiver
USB mass
storage device
This receiver