Pioneer XW-LF1-W - Manual (Page 17)

17
En
English
Français
Español
Pairing and connection using
NFC
NFC stands for Near Field Communication.
If a smartphone that supports NFC is placed
close to the unit, the unit’s power will
automatically come on, and Bluetooth
pairing and connection can easily be
established. For details, refer to the user
manual for the NFC-equipped device.
Note
• Supported OS: Android 4.1 and above
• This may not operate properly,
depending on the smartphone or tablet
device.
• The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the
United States and in other countries.
• Android is a trademark of Google Inc.
1 Hold the device to be connected
up close to the unit center of the top
of the unit.
2 Pairing automatically begins.
When a NFC-equipped smartphone is
detected, the POWER indicator will flash
once.
3 Once connection with the NFC-
equipped smartphone is completed,
the POWER indicator will change
from blinking to remaining lit.
4 Start playback of the music
from the NFC-equipped
smartphone.
Note
• NFC can also be used to quickly cancel a
Bluetooth connection. If you perform
Step 1 using a NFC-equipped
smartphone that is already connected
via Bluetooth, the connected will be
cancelled.
Automatic connection to a
Bluetooth
device
With the Bluetooth function for your
Bluetooth device turned on, turn on the
power to the unit and it will automatically
attempt to connect again to the last
Bluetooth device to which it was connected
(or that was registered to it).
LFA_En.fm 17 ページ ２０１４年５月１２日 月曜日 午後３時３９分