Attenuation 53, Initial settings, Switching the handsfree telephoning – Pioneer DEH-P8400MP User Manual
Page 53: Switching the telephone muting/attenuation, Switching the telephone standby, Switching the motion screen
09
Section
Initial Settings
En
53
English
Español
Deutsch
F
rançais
Italiano
Nederlands
Switching the handsfree
telephoning
You can switch the handsfree telephoning on/off
in accordance with the connection of the cellu-
lar telephone you use.
When using the handsfree telephone unit (sold
separately), select
Hands-Free:ON
.
1 Press
OPEN
to open the front panel.
2 Press
FUNCTION
to select
TEL1
.
Press
FUNCTION
until
TEL1
appears in the dis-
play.
3 Select
TEL1
on or off with
5/∞.
Pressing
5/∞ will switch
Hands-Free
between
on and off and that status will be displayed (e.g.,
Hands-Free:ON
).
Switching the telephone
muting/attenuation
When a call is made or received using a cellular
telephone connected to this product, you can
select between muting and attenuation when
using the Handsfree Telephone Unit (when
Hands-Free:OFF
is selected).
1 Press
OPEN
to open the front panel.
2 Press
FUNCTION
to select
TEL2
.
Press
FUNCTION
until
TEL2
appears in the dis-
play.
3 Switch the telephone muting/attenuation
with
2/3.
Pressing
2/3 will switch between
Telephone
:ATT
(attenuation) and
Telephone :MUTE
(mut-
ing) and that status will be displayed.
Switching the telephone standby
If you want to use the handsfree telephone unit
without playing other sources of this product,
activate the telephone standby mode.
1 Press
OPEN
to open the front panel.
2 Press
FUNCTION
to select
TEL2
.
Press
FUNCTION
until
TEL2
appears in the dis-
play.
3 Select
TEL2
on or off with
5/∞.
Pressing
5/∞ will switch
TELstandby
between
on and off and that status will be displayed (e.g.,
TELstandby:ON
).
Note
• You can select the telephone standby mode
when
Hands-Free:ON
is selected in the hands-
free telephoning mode.
Switching the motion screen
You can switch on/off the moving source icon
display. When off is selected, the moving source
icon disappears after opening screen is dis-
played.
1 Press
OPEN
to open the front panel.
2 Press
FUNCTION
to select
DISP
.
Press
FUNCTION
until
DISP
appears in the
display.
3 Switch
DISP
on or off with
5/∞.
Pressing
5/∞ will switch
Motion
between on
and off and that status will be displayed (e.g.,
Motion :ON
).