Pioneer DCS-404K - Manual (Page 27)

27 Installation
3
Installa
tion
LANGUAGE
Menu Language
Select a language for the Setup menu and
then on screen display.
Disc Audio / Disc Subtitle / Disc Menu
Select the language you prefer for the audio
track (disc audio), subtitles, and the disc menu.
Original – Refers to the original language in
which the disc was recorded.
Other – To select another language, press
numeric buttons and then  ENTER to enter
the corresponding 4-digit number according
to the language code list on the page 43. If you
enter the wrong language code, press CLEAR.
Off (for Disc Subtitle) – Turn off Subtitle.
DISPLAY
TV Aspect
Select which screen aspect to use based on
the shape of your TV screen.
4:3 – Select when a standard 4:3 TV is
connected.
16:9 – Select when a 16:9 wide TV is
connected.
Display Mode
The Display Mode setting works only when the
TV Aspect mode is set to 4:3.
Letterbox – Displays a wide picture with
bands on the upper and lower portions of the
screen.
Panscan – Automatically displays the wide
picture on the entire screen and cuts off
the portions that do not fit. (If the disc/file is
not compatible with Pan Scan, the picture is
displayed at Letterbox ratio.)
TV Output Select
Select an option according to the TV
connection type.
RGB – When your TV is connected with the
SCART jack.
YPbPr – When your TV is connected with the
COMPONENT/ PROGRESSIVE SCAN jacks on the
unit.
NOTE
If you change TV Output Select to RGB from
YPbPr on the setup menu especially when
connecting the unit in the way of component
video connection, the screen turns black. In that
case, connect the video cable to MONITOR jack
and select YPbPr on the setup menu again.