Pioneer BCS-HF828 - Manual (Page 27)

Connecting 27
En
Connec
ting
2
Speaker setup for BCS-HW929
Preparing the speakers
1. Attach the non-skid pads to the base of
each speaker.
For front speaker:
Use the supplied adhesive to attach six
pads to the base (bottom) of speaker.
Non-skid pad
(for front)
Non-skid pad
(for front)
Affix to
three locations
For subwoofer:
Use the supplied adhesive to attach four
large pads to the base of subwoofer.
Large non-skid pads
2. Connect the wires to the player.
Insert the cables connected to the player to
the same colored connector on the speaker.
Caution
• Do not connect any speakers other than those
supplied to this system.
• Do not connect the supplied speakers to any
amplifier other than the one supplied with this
system. Connection to any other amplifier may
result in malfunction or fire.
• Please connect the speaker cable of subwoofer
(purple) to orange of the player.
• These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.