Pioneer BCS-HF828 - Manual (Page 71)

Other Operating 71
En
O
ther Oper
ating
7
Playing your iPod/iPhone
Caution
• When your iPod/iPhone is connected to this unit
and you wish to operate the iPod/iPhone directly,
be sure to hold the iPod/iPhone steady with the
other hand to prevent malfunctions due to faulty
contacts.
1. Connect your iPod/iPhone.
To connect your iPod/iPhone, see
Connecting your iPod/iPhone on page 70.
2. Press FUNCTION to select iPod as the
input source and press ENTER.
Button What it does
 PLAY Starts normal playback.
 PAUSE Pauses playback.
 STOP Pauses playback.
 PREV Press to skip to the start of the
current file, then previous files.
 NEXT Press to skip to the next file.
 Press to start fast reverse scanning.
 Press to start fast forward scanning.
MENU Use to access the iPod/iPhone menu.
/ /ENTER Use to control the iPod/iPhone
menu.
Important
• If this unit cannot play your iPod/iPhone,
perform the following troubleshooting
checks:
– Check whether the iPod/iPhone is
supported by this unit.
– Reconnect the iPod/iPhone to the unit. If
this doesn’t seem to work, try resetting
your iPod/iPhone.
– Check the iPod/iPhone software is
supported by this unit.
• If the iPod/iPhone cannot be operated, check
the following items:
– Is the iPod/iPhone connected correctly?
Reconnect the iPod/iPhone to the unit.
– Is the iPod/iPhone experiencing a
hangup? Try resetting the iPod/iPhone,
and reconnect it to the unit.
Note
• When input is switched from iPod to another
function, iPod/iPhone playback is temporarily
stopped.