Pioneer AVIC-F9310BT - Manual (Page 148)

3 Touch [AV Settings].
The
“AV System Settings” menu appears.
4 Touch the item that you want to
change the setting.
AVIC-F30BT
AVIC-F930BT, AVIC-F9310BT
# If you touch , the previous screen returns.
Setting video input 1 (AV1)
You can switch this setting according to the
connected component.
p This setting applies to mini-jack input.
1 Display the
“AV System Settings”
screen.
= For details, refer to Displaying the screen for
AV system settings on the previous page.
2 Touch [AV1 Input].
Each touch of [ AV1 Input] changes the set-
ting as follows:
! iPod: iPod connected with the USB Inter-
face cable for iPod (CD-IU51V) (sold sepa-
rately)
! Video: External video component
! Off: No video component is connected.
p Use “AV1 Input” when connecting CD-
RM10 (sold separately) through the external
video component.
Setting video input 2 (AV2)
You can switch this setting according to the
connected component.
p This setting applies to RCA inputs
(AUDIO INPUT and VIDEO INPUT) on the
back of the system.
1 Display the “AV System Settings”
screen.
= For details, refer to Displaying the screen for
AV system settings on the previous page.
2 Touch [AV2 Input].
Each touch of [ AV2 Input] changes the set-
ting as follows:
! Off: No video component is connected.
! Video: External video component
Changing the wide screen mode
1 Display the
“AV System Settings”
screen.
= For details, refer to Displaying the screen for
AV system settings on the previous page.
2 Touch [Wide Mode].
Each touch of [ Wide Mode] changes the set-
ting as follows:
! Full (full)
A 4:3 picture is enlarged in the horizontal
direction only, enabling you to enjoy a 4:3
TV picture (normal picture) without any
omissions.
! Cinema (cinema)
Engb
148
Chapter
26 Customising preferences