Pioneer AVIC-F9310BT - Manual (Page 17)

2 Touch [Disc Eject].
The disc is ejected.
Inserting and ejecting an
SD memory card
CAUTION
! Ejecting an SD memory card during data
transfer can damage the SD memory card. Be
sure to eject the SD memory card by the pro-
cedure described in this manual.
! If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
! Do not insert anything other than SD memory
cards.
p This system is not compatible with Multi
Media Card (MMC).
p Compatibility with all SD memory cards is
not guaranteed.
p This unit may not achieve optimum perfor-
mance with some SD memory cards.
Inserting an SD memory card
(for AVIC-F30BT)
CAUTION
! Do not press the h button when an SD mem-
ory card is not fully inserted. Doing so may da-
mage the card.
! Do not press the h button before an SD mem-
ory card has been completely removed. Doing
so may damage the card.
1 Press the h button.
The
“Monitor Setup” screen appears.
2 Touch [SD Insert].
The LCD panel opens, and the SD card slot ap-
pears.
3 Insert an SD memory card into the SD
card slot.
Insert it with the label surface facing to the up-
side and press the card until it clicks and com-
pletely locks.
4 Press the h button.
The LCD panel closes.
p If data related to map data, such as custo-
mised POI data, is stored on the SD mem-
ory card, the navigation system restarts.
Ejecting an SD memory card
(for AVIC-F30BT)
1 Press the h button.
The
“Monitor Setup” screen appears.
Engb
17
Chapter
02
Basic
operation
Basic operation