Pioneer AVIC-F910BT - Manual (Page 127)

% Touch [AV1 Input] on the “AV System
Settings
” menu.
= For details, refer to Displaying the “AV Sys-
tem Settings
” menu on the previous page.
Each touch of [ AV1 Input] changes the set-
ting as follows:
! iPod — iPod connected with the USB Inter-
face cable for iPod (CD-IU230V)
! Video — External video component
! Off — No video component is connected
Setting video input 2 (AV2)
You can switch this setting according to the
connected component.
p This setting applies to mini-jack input on
the front panel.
% Touch [AV2 Input] on the “AV System
Settings
” menu.
= For details, refer to Displaying the “AV Sys-
tem Settings
” menu on the previous page.
Each touch of [ AV2 Input] changes the set-
ting as follows:
! Off — No video component is connected
! Video — External video component
p Use AV2 Input when connecting CD-RM10
(sold separately) through the external video
component.
Switching the auto aerial setting
If the blue lead of the navigation system is
connected to the aerial control terminal of the
vehicle, select either of the following settings.
! Radio — The aerial extends or turns on
only when the audio source is FM or AM.
The aerial is stored or turned off when the
AV source is switched to another source.
! Power — The aeriel extends or turns on
when the ignition switch is turned on. The
aeriel is stored or turned off when the igni-
tion switch is turned off.
% Touch [Ant CTRL] on the “AV System
Settings
” menu.
= For details, refer to Displaying the “AV Sys-
tem Settings
” menu on the previous page.
Touching [ Ant CTRL] switches between
[ Radio] and [Power].
p Regardless of whether [Radio] or [Power]
is selected, turning off the ignition switch
will cause the aeriel to automatically retract
or turn off.
Changing the wide screen mode
% Touch [Wide Mode] on the “AV System
Settings
” menu.
= For details, refer to Displaying the “AV Sys-
tem Settings
” menu on the previous page.
Each touch of [ Wide Mode] changes the set-
ting as follows:
Full
— Normal
Full (full)
A 4:3 picture is enlarged in the horizontal di-
rection only, enabling you to enjoy a 4:3 TV pic-
ture (normal picture) without any omissions.
Normal (normal)
A 4:3 picture is displayed normally, giving you
no sense of disparity since its proportions are
the same as that of the normal picture.
p Different settings can be stored for each
video source.
p The same setting is automatically applied
for the following grouping.
! SD, USB, iPod
! AV1 and AV2
p When video is viewed in a wide screen
mode that does not match its original as-
pect ratio, it may look strange.
p Remember that use of this system for com-
mercial or public viewing purposes may
constitute an infringement on the author
’s
rights protected by the Copyright Law.
p The navigation map and the rear view cam-
era picture is always viewed at Full.
Customising preferences
Engb
127
Chapter
21
Customising
prefe
rences