Pioneer CNDV-900HD - Manual (Page 12)

12
Instructions for upgrading
3. Press OPEN CLOSE button and insert the
upgrade disc into the disc loading slot.
The message confirming whether or not to
start the update will appear.
❒
If the message doesn’t appear, eject the
disc and display the map of current position
and then reinsert the disc.
4. Touch [Yes].
❒ To cancel the update, touch [No].
5. Touch [Yes].
The message “Password obtained from
Pioneer should be entered to update. Have
you obtained the password? Please press
“Cancel” to stop update.” appears. To start
the updating, touch [Yes].
Alternative options:
[No]
Shows “Device Number” (Device#) of your
navigation system.
[Cancel]
Cancel the update.
6. Enter the password for authentication that
you obtained, then touch [OK].
After you touch [OK], the system starts the
authentication. When the authentication is
finished properly, the message for
confirmation will appear.
7. Touch [Yes] to start the update.
The navigation system restarts and then the
installation begins.
After you touch [Yes] in this screen, you
cannot abort the updating until the installation
of the system programme finishes.
The update takes approximately 3 hours in
total.
! CAUTION
For users who use AVIC-HD3II or use the
system upgraded to CNDV-800HD, updating
another software programme will begin first.
While this screen is visible, NEVER
switch the key position from ACC or turn
off the navigation system.
After the system is complete, the navigation
system restarts.
Check the details of the caution message
and touch [OK].
❒
The users who use other models can skip
this caution and proceed to next step.
MAN-CNDV-900HD-EN.fm Page 12 Monday, August 10, 2009 9:49 AM