Pioneer VSX-S510-S User Manual
Page 8
Controls and displays
1
1
8
58
7
4
17
Tuner indicators
RDS
– Lights when an RDS broadcast is received
(
page 34
). (for Europe)
ST
– Lights when a stereo FM broadcast is being received
in auto stereo mode (
page 33
).
TUNE
– Lights when a normal broadcast channel.
PRESET
– Shows when a preset radio station is registered
or called.
MEM
– Blinks when a radio station is registered.
kHz/MHz
– Lights when the character display is showing
the currently received AM/FM broadcast frequency.
18
Speaker indicators
Shows if the speaker system is on or not (
page 14
).
19
Sleep timer indicator
Lights when the receiver is in sleep mode (
page 9
).
20
PRESET information or input signal indicator
Shows the preset number of the tuner or the input signal type,
etc.
21
Character display
Displays various system information.
22
DTS indicators
DTS
– Lights when a source with DTS encoded audio
signals is detected.
HD
– Lights when a source with DTS-EXPRESS or DTS-HD
encoded audio signals is detected.
ES
– Lights to indicate DTS-ES decoding. (VSX-S510 only)
96/24
– Lights when a source with DTS 96/24 encoded
audio signals is detected.
NEO:6
– When one of the NEO:6 modes of the receiver is
on, this lights to indicate NEO:6 processing (
page 36
).
23
Dolby Digital indicators
2 D
– Lights when a Dolby Digital encoded signal is
detected.
2 D+
– Lights when a source with Dolby Digital Plus
encoded audio signals is detected.
2HD
– Lights when a source with Dolby TrueHD encoded
audio signals is detected.
EX
(VSX-S510 only) – Lights to indicate Dolby Digital EX
decoding.
2PLII(x)
(VSX-S510 only) – Lights to indicate 2 Pro Logic
II decoding (see
Listening in surround sound on page 36
for more on this).
2PLII
– Lights to indicate 2 Pro Logic II decoding. (see
Listening in surround sound on page 36
for more on this).
24
ADV.S.
Lights when one of the Advanced Surround modes has been
selected (see
Using the Advanced surround on page 37
for
25
SIGNAL SELECT indicators
DIGITAL
– Lights when a digital audio signal is selected.
Blinks when a digital audio signal is selected and selected
audio input is not provided.
HDMI
– Lights when an HDMI signal is selected. Blinks
when an HDMI signal is selected and selected HDMI input
is not provided.
26
Up Mix indicator (VSX-S510 only)
Lights when the Up Mix function is set to ON (
page 39
).
27
DIR.
Lights when the DIRECT or PURE DIRECT mode is switched
on (
page 37
).