Pioneer PDP-435XDE - Manual (Page 3)

01 Enjoying DTV broadcasts
English
3
En
Watching DTV Programmes
Digital TV (DTV) not only replaces the conventional analogue
TV channels, but also provides more channels, clearer picture
quality, and various types of useful information. It also
provides various features, including subtitling and multiple
audio tracks.
• When executing Auto Installation (page 28 in the operating
instructions), make sure to select “Digital” or “All” as the
tuner type.
• Selecting the DTV mode when no channels yet searched
will only display “DTV Setup” screen with only the item
“Installation” selectable.
• While in the DTV mode, press m to display the Teletext
screen (except in UK).
Changing channels
1 Press TV/DTV to select the DTV mode.
2 Press ENTER to call up the Channel List screen.
• Select a channel ( / then ENTER).
• You can also select channels by pressing buttons 0 to
9 and P+/P– on the remote control unit.
• While in DTV mode, press 001 to access channel 1 (1-digit
channel) quickly. You can however, select the channel 1 by
pressing 01 or 1 but have to wait for 2 seconds since the
last digit input. The same applies for 2-digit channels.
• P+/P– cannot pick up channels that are set to skip or not
registered as favourites (with Favourite function set to “On”,
see page 6 for details).
• If the channel is locked, you must enter the correct pass-
word each time (see page 42 in the operating instructions).
• While receiving DTV radio channels, the screen saver
automatically starts when no operation is done for 3
minutes.
Using banner information
1
Press p.
• When in the DTV mode, press / to display the Info
banner on other channels.
• Press ENTER to tune in a channel.
• The info banner also displays icons for Favourites ( ),
Subtitles ( ) and Teletext ( ) if they apply to the
selected channel.
• Press EXIT to remove the Info banner from the
screen.
2 To view more detailed programme information, press
p again.
• Switch Now and Next programmes ( / ).
• Display detailed information about other channels
( / ).
• Press ENTER to remove the detailed information and
tune in to the channel.
• Press RETURN to remove the detailed information
screen.
• Press EXIT to remove the on-screen information from
the screen.
• If the banner contains further information, “More …”
is displayed.
• Banner information is updated every minute.
• Some programmes may not provide detailed programme
information.
• Due to the inaccurate information provided by the broad-
caster some icons may appear or be absent in error.
001
002
003
004
************
************
******
************
005
006
****
******
Wed.30.Apr 12:46
Now
001 ************
Next
********************
************* 12:00
12:30
11:30
12:00
-
-
Now ************************
More...
12:00 11:30 -