Pioneer VSX-S500-S - Manual (Page 25)

Basic playback
25
En
04 04
2 Use / to select audio file or Internet radio station,
and then press ENTER.
3 Use / to select playback or delete options and then
press ENTER.
 – Selected item will begin playing
 – Deletes selected item from Favorites folder
• Select to undo previous operation.
Network setup menu
Setting up the network to listen to Internet radio on this
receiver.
1 Select ‘Settings’ from the Main Menu.
2 Select the setting you want to adjust.
• Network – Adjust settings for the network (see Network
settings below).
• General – Use to reset all network connection settings to
their initial, factory-setting condition (see General settings
below).
Network settings
In case the router connected to the LAN terminal on this
receiver is a broadband router (with a built-in DHCP server
function), simply turn on the DHCP server function, and you
will not need to set up the network manually. You must set up
the network as described below only when you have
connected this receiver to a broadband router without a
DHCP server function. Before you set up the network, consult
with your ISP or the network manager for the required
settings. It is advised that you also refer to the operation
manual supplied with your network component.
1 Select ‘Network’ from the Settings menu.
2 Select ‘Modes’ from the Network Settings menu.
In case you make changes to the network configuration
without the DHCP server function, make the corresponding
changes to the network settings of this receiver.
• DHCP (default setting) – Select if the server is DHCP
compatible.
- When DHCP is selected, connection will begin
automatically. Connection is complete when network
connection details are displayed. Press
ENTER to return
to the previous screen.
• STATIC – To connect to the server manually, follow the
instructions listed below.
- Press  to delete the immediately preceding character.
- Press  to switch between character types.
- Press / to choose the desired character from those
displayed and press ENTER.
- Once input is complete, or if you wish to cancel the
input operation, press
 until OK/CANCEL is
displayed, then use / to choose either OK or
CANCEL and press ENTER.
Note
• If STATIC is selected, the settings will be as follows.
- IP (IP address)
The IP address to be entered must be defined within the
following ranges. If the IP address defined is beyond the
following ranges, you cannot play back audio files
stored on components on the network or listen to
Internet radio stations.
Class A: 10.0.0.1 to 10.255.255.254
Class B: 172.16.0.1 to 172.31.255.254
Class C: 192.168.0.1 to 192.168.255.254
- MASK (Subnet Mask)
In case an xDSL modem or a terminal adapter is directly
connected to this receiver, enter the subnet mask
provided by your ISP on paper. In most cases, enter
255.255.255.0.
- Gateway (Default Gateway)
In case a gateway (router) is connected to this receiver,
enter the corresponding IP address.
- DNS (DNS server)
Enter the DNS server address you received in writing
from your internet service provider.
• Select Status from the Network Settings menu to show
your current network connection mode and details.
General settings
1 Select ‘General’ from the Settings menu.
2 Select the item you want to set up from the General
Settings menu.
• Factory Settings – Use to reset all network connection
settings to their initial, factory-setting condition.
- When “ Warning: All Settings will be lost! Are you
sure?” is displayed, select  and press ENTER. While
the settings are being reset, the screen will display a
“
Please Wait” message. Resetting is complete once the
screen returns to the Main Menu.
- To quit the resetting, select .
• About – Displays the MAC address of this receiver.
Main Menu
Now Playing
Favorites Settings
Internet
Radio
Music
Library
Settings
1 of
1
Network
General
Settings
1 of
1
Network
General
Network Settings
1 of
1
Modes
Status
Network Modes
1 of
1
DHCP
STATIC
Settings
1 of
1
Network
General
General Settings
1 of
1
Factory Settings
About