Pioneer VSX-S500-S - Manual (Page 39)

The Home Menu
39
En
06 06
The Pre Out Setting
Specify either using the surround back speaker or the front
height speaker connection with the
PRE OUT SURR BACK/
FRONT HEIGHT outputs. An additional amplifier is required
for the speaker connection.
• Default setting: Surr. Back
1 Select ‘Pre Out Setting’ from the Home Menu.
2 Select which speaker to connect to the PRE OUT SURR
BACK/FRONT HEIGHT outputs using /.
• Surr. Back – Connect the surround back speaker.
• Height – Connect the front height speaker.
3 When you’re finished, press RETURN.
You return to the Home Menu.
The Input Assign menu
The composite video input terminal is assigned to ANALOG
AUX under factory settings, but this can be changed to
DIGITAL AUX or CD input.
1 Select ‘Input Assign’ from the Home Menu.
2 Select ‘Composite Input’ from the Input Assign menu.
3 Select the desired input option for the composite video
input terminal.
Select between
ANALOG AUX, DIGITAL AUX, CD or OFF.
• Make sure you have connected the audio from the
component to the corresponding inputs on the rear of the
receiver.
4 When you’re finished, press RETURN.
You return to the Input Assign menu.
The Video Parameter setting
This receiver can up-convert the video signal input from the
composite video terminal; the output is from the HDMI OUT
terminal. The following shows the various settings for this
function.
Video Converter
This setting specifies valid/invalid for the function that
converts the input video signal from composite video
terminal. When
OFF is selected, Resolution and Aspect can
not be set.
1 Select ‘Video Parameter’ from the Home Menu.
2 Select ‘Video Converter’ from the Video Parameter
menu.
3 Select the setting for converting each type of video
input.
• ON – The signal is output also to the HDMI OUT terminal.
• OFF – The signal input from the HDMI terminal of the
selected input function will be output from the HDMI OUT
terminal. The signal input from the analog composite
video will not be output from the HDMI OUT terminal.
4 When you’re finished, press RETURN.
You return to the Video Parameter menu.
Home Menu
1 . Auto MCACC
2 . Manual
SP Setup
3 . Pre Out Setting
4 . Input Assign
5.Video Parameter
6.HDMI Setup
7.Auto Power Down
8.FL Demo Mode
3.Pre Out Setting
Return
Pre Out Surr. Back
Home Menu
1 . Auto MCACC
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5.Video Parameter
6.HDMI Setup
7.Auto Power Down
8.FL Demo Mode
4.Input Assign
Return
a.Composite Input
4a.Composite Input
Return
I n p u t ANALOG AUX
Home Menu
1 . Auto MCACC
2 . Manual SP Setup
3 . Pre Out Setting
4 . Input Assign
5.Video Parameter
6.HDMI Setup
7.Auto Power Down
8.FL Demo Mode
5.Video Parameter
Return
a.Video Converter
b.Resolution
c.Aspect
5a.Video Converter
BD/BDR
DVD/DVR
GAME
STB
Return
[ O F F ]
[ O F F ]
[ O F F ]
ON