Pioneer DEH-P6900IB - Manual (Page 49)

Notes
! When the multi-CD player performs the pre-
paratory operations, Ready is displayed.
! If an error message such as ERROR-11 is dis-
played, refer to the multi-CD player owner
’s
manual.
! If there are no discs in the multi-CD player ma-
gazine, No Disc is displayed.
Selecting a track directly
The operation is basically the same as that of
the built-in CD player.
For details concerning operation, refer to Se-
lecting a track directly on page 18.
Introduction of advanced
operations
You can use Compression (compression and
DBE) only with a multi-CD player that supports
them.
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn MULTI-CONTROL to select the
function.
Turn
MULTI-CONTROL to switch between the
functions in the following order:
Play mode (repeat play)
—Random mode
(random play)
—Scan mode (scan play)—
Pause (pause)
—Compression (compression
and DBE)
—ITS play mode (ITS play)—
ITS memo (ITS programming)
—
TitleInput "A" (disc title input)
# You can also select the function by pressing
FUNCTION on the remote control.
# To return to the playback display, press BAND.
# If you do not operate functions except for
ITS memo and TitleInput "A" within about 30
seconds, the display is automatically returned to
the ordinary display.
Function and operation
Play mode, Random mode, Scan mode,
Pause, Compression and TitleInput "A" op-
erations are basically the same as that of the
built-in CD player.
Function name Operation
Play mode
Refer to Selecting a repeat play
range on page 19.
But the repeat play ranges you can
select are different from that of the
built-in CD player. The repeat play
ranges of the multi-CD player are
as below:
! M-CD repeat – Repeat all
discs in the multi-CD player
! Track repeat – Repeat just the
current track
! Disc repeat – Repeat the cur-
rent disc
Random mode
Refer to Playing tracks in random
order on page 19.
Scan mode
Refer to Scanning folders and
tracks on page 19.
Pause
Refer to Pausing disc playback on
page 20.
Compression
Refer to Using compression and
BMX on page 20.
Multi-CD player has DBE (dynamic
bass emphasis) function instead
of BMX.
The settings can be switched as
below:
COMP OFF
—COMP 1—COMP 2
—COMP OFF—DBE 1—DBE 2
ITS play mode
Refer to Using ITS playlists on the
next page.
ITS memo
Refer to Using ITS playlists on the
next page.
TitleInput "A"
Refer to Entering disc titles on
page 20.
Available accessories
En
49
English
Section
03