Pioneer DDJ-ERGO-K - Manual (Page 16)

16 En
6 AUTO LOOP (MOVE GRID) control
! Turn:
Changes the width of the loop playback section.
! Press:
Turns loop playback on and off.
! [SHIFT] + turn:
Moves the beat grid position.
! [SHIFT] + press:
Switches loop playback on/off.
7 DECK buttons
TRAKTOR PRO 2
Switch the deck to be operated.
8 HOT CUE/DELETE buttons
TRAKTOR PRO 2
! Press:
Set hot cue points and calls out hot cues.
! [SHIFT] + press:
Delete the hot cue set for that button.
9 KEYLOCK (TEMPO RANGE) button
! Press:
Turns the key lock function on and off.
! [SHIFT] + press:
The [TEMPO] slider’s range of variation switches each time this
is pressed.
a VINYL (PULSE MODE) button
! Press:
This switches the [VINYL] mode on/off.
! [SHIFT] + press:
Switches the jog dials’ illumination mode (Pulse Mode).
b TEMPO slider
Adjusts the playing speed.
c SYNC (MASTER) button
! Press:
Synchronizes to the master deck’s tempo.
! [SHIFT] + press:
Sets the master deck for synchronization.
d Jog dial
! Scratch
When the [VINYL] mode is turned on and the jog dial is turned
while pressing on its top, the track is played according to the
direction and speed at which the jog dial is turned.
! Pitch bend
The playing speed can be adjusted by turning the outer part of
the jog dial during playback.
The top of the jog dial has an embedded switch. Do not place objects
on the jog dial or subject it to strong forces. Also note that water or
other liquids getting into the set will lead to malfunction.
REMIX DECK
TRAKTOR PRO 2
The maximum number of sample slots that can be operated with this
unit is 4 per REMIX DECK.
1 f button
Plays all sample slots at once. When pressed during playback, stops
playback of all sample slots.
2 CUE button
Triggers all samples at once.
3 SHIFT button
When another button is pressed while pressing the [SHIFT] button, a
different function is called out.
4 IN button
Sets sample playback to the one-shot mode for all samples at once.
After the samples are played once, sample playback stops.
5 OUT button
Sets sample playback to the loop mode for all samples at once. The
samples are played in a loop.
6 AUTO LOOP (MOVE GRID) control
! Turn:
Halves or doubles the length of all the samples at once.
! Press:
Resets the loop size for all samples at once.
7 DECK buttons
Switches the deck to be operated.
8 HOT CUE/DELETE buttons
! Press:
When pressed during playback, playback starts from the
beginning.
! [SHIFT] + press:
Turn the sample slot individual control mode on and off.
Only slots whose indicators are flashing can be controlled.
9 KEYLOCK (TEMPO RANGE) button
Turns the key lock function on and off for all sample slots at once.
b TEMPO slider
Adjusts the playing speed of all samples at once.
c SYNC (MASTER) button
Synchronizes the phase of all samples at once.
d Jog dial
During playback, turn the jog dial while pressing down on its top.
! Scratch
When the [VINYL] mode is on, the source is played according to
the direction and speed at which the jog dial is turned.
! Pitch bend
When the [VINYL] mode is off, the playing speed can be
adjusted.
e SAMPLER button
! Press:
Starts/stops playback of the sample.
The sample is loaded from the TRACK DECK with the REMIX
DECK starting from empty.
When the sample is playing, playback returns to the beginning of
the sample and continues.
During loop playback, mutes and unmutes the sound.
! [SHIFT] + press:
When a sample is playing, playback returns to the beginning of
the sample and stops.
The sample is loaded from the list with the REMIX DECK starting
from empty. When pressed again, the sample is deleted from the
REMIX DECK.
f SAMPLE VOL control
! Turn:
Adjusts the audio level of all the sample slots.
! Press:
Resets the audio level of all the sample slots.
! [SHIFT] + turn:
Applies the filter to all the sample slots.
! [SHIFT] + press:
Resets the filter for all the sample slots.