Pioneer DDJ-ERGO-K - Manual (Page 17)

17 En
Part
names
and
functions
3 Mixer
HI
MIN MAX
MID
MIN MAX
LOW
MIN MAX
10
0
1
2
3
4
5
6
7
8
9
REC
FUNCTION
CUE
DJ CONTROLLER
10
0
1
2
3
4
5
6
7
8
9
GAIN
MIN MAX
MIX
CUE MASTE
VOL
CUE MASTE
HI
MIN MAX
MID
MIN MAX
LOW
MIN MAX
GAIN
MIN MAX
MASTER VOL
MIN MAX
AUX / MIC VOL
MIN MAX
1
2
5
6
4
a
3
7 7
9
8
1 MASTER VOL control
Adjusts the sound level output from the master.
2 AUX/MIC VOL control
Adjusts the audio output level of the [AUX IN] and [MIC] terminals.
3 GAIN controls
Adjust the sound level input to the various decks.
4 FUNCTION (REC) button
! Press:
Loads the track selected with the cursor into the preview player
and plays it.
! [SHIFT] + press:
TRAKTOR PRO 2
Clicks this to start/stop recording.
5 HEADPHONES MIX control
Adjusts the balance of the monitor volume between the sound of the
deck whose [CUE
] button is pressed and the master sound.
6 HEADPHONES VOL control
Adjusts the audio level output from the [PHONES] terminal.
7 EQ (HI, MID, LOW) controls
These adjust the sound quality input to the various decks.
[HI] (treble range), [MID] (middle range), [LOW] (low range)
8 CUE (Headphones cue buttons)
Use this to monitor the sound of the respective decks over the
headphones.
9 Channel faders
Adjust the sound level output from the various decks.
a Crossfader
Switches the sound of the decks assigned to the left and right sides
of the crossfader for output.
Do not pull on the channel fader and crossfader knobs with excessive
force. The knobs have a structure by which they cannot be pulled off
easily. Pulling the knobs strongly may result in damaging the unit.