Pioneer AVH-5200DVD - Manual (Page 41)

1 Display the audio function menu.
Refer to Introduction of menu operations on
page 39.
2 Touch Graphic EQ on the audio function
menu.
3 Touch c or d to select the desired item.
Powerful
—Natural—Vocal—Custom1—
Custom2
—Flat—Super Bass
4 Touch the Equalizer band to adjust.
5 Touch a or b to adjust the level of the
equalizer band.
Range:
+12dB to -12dB
# You can then select another band and adjust
the level.
Using the auto-equalizer
The auto-equalizer is an equalizer curve cre-
ated by auto EQ (refer to Auto EQ (auto-equaliz-
ing) on page 51).
You can turn the auto-equalizer on or off.
If you connect an optional microphone to this
unit, you can use this function.
1 Display the audio function menu.
Refer to Introduction of menu operations on
page 39.
2 Touch Auto EQ to turn the auto-equali-
zer on or off.
# You cannot use this function if auto EQ has
not been carried out.
Using sonic center control
Sound that is suited for the listening position
can easily be created with this function.
1 Display the audio function menu.
Refer to Introduction of menu operations on
page 39.
2 Touch Sonic Center Control on the
audio function menu.
3 Touch c or d to select a listening posi-
tion.
Range:
Left:7 to Right:7
Note
When adjustments are made to the listening po-
sition, the speaker outputs are automatically set
to the appropriate levels.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-frequency ranges at low volume.
1 Display the audio function menu.
Refer to Introduction of menu operations on
page 39.
2 Touch Loudness on the audio function
menu.
3 Touch c or d to select a desired level.
Off (off)
—Low (low)—Mid (mid)—High
(high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
! The cut-off frequency and output level can
be adjusted when the subwoofer output is
on.
1 Display the audio function menu.
Refer to Introduction of menu operations on
page 39.
2 Touch Subwoofer on the audio function
menu.
3 Touch On or Off next to Subwoofer to
turn the subwoofer output on or off.
4 Touch Normal or Reverse next to Phase
to select the phase of subwoofer output.
5 Touch c or d next to Level to adjust
the output level of the subwoofer.
Range:
+6 to -24
En
41
Section
11
Menu
operations
Menu operations