Pioneer BCS-727 - Manual (Page 90)

Troubleshooting 90
En
Troubleshooting
9
Others
Problem Check Remedy
Power does not
turned on. Is the power cord properly
connected? y Plug the power cord securely into the power outlet.
y Unplug the power cord, wait several seconds, then plug the power
cord back in.
Power turns OFF without
warning Auto Power Off is set. The display will move to screen saver mode in 1
minutes and will automatically power OFF in about 30 minutes.
The player’s power turns
off automatically. Is Control set to On? The player’s power may turn off together with the power of the TV
connected to the HDMI OUT terminal. If you do not want the player’s
power to turn off when the TV’s power is turned off, set Control to Off
(page 77).
The player’s power turns
on automatically. Is Control set to On? The player’s power may turn on together with the power of the TV
connected to the HDMI OUT terminal. If you do not want the player’s
power to turn on when the TV’s power is turned on, set Control to Off
(page 77).
Cannot be operated with
the remote control. Are you operating the remote
control from a point too far
away from the player? Operate from within 7 m of the remote control sensor.
Are the batteries dead? Replace the batteries (page 10).
Settings I have made have
been cleared. y Have you disconnected the
power cord while the player’s
power was on?
y Has there been a power
failure?
Always press  STANDBY/ON on the player’s front panel or 
STANDBY/ON on the remote control, check that POWER OFF has turned
off from the player’s front panel display and wait for more than 10
seconds before disconnecting the power cord. Be particularly careful
when the power cord is connected to the AC outlet on another device
because the player turns off in conjunction with the device.
USB (external storage)
device does not work with
this player properly. Is the USB device properly
connected? y Turn the player’s power off, then turn the power back on.
y Turn the player’s power off, then reconnect the external storage device
(page 51).
Is the USB device connected
via an extension cable? Do not use an extension cable. The player may not work properly with it.
Is the external storage device
connected to the USB port via
a memory card reader or USB
hub? External storage device may not work if connected to the USB port via a
memory card reader or USB hub.
Does the external storage
device contain multiple
partitions? External storage devices may not be recognized if they contain multiple
partitions.
Some external storage devices may not operate.
Is the external storage device
write-protected? Turn the player’s power off, then disable the write-protection.
Is the external storage device’s
file system FAT16 or FAT32? Only external storage devices with a FAT16 or FAT32 file system can be
used.
Turn the player’s power off, then turn the power back on.
Display window is dark Press the DIMMER on the remote and select the desired display
brightness.