Pioneer PDP-505HDE - Manual (Page 37)

10 Using the Electronic Programme Guide (EPG) (for Analogue TV only)
English
37
En
Recording a programme using a record-
ing equipment
When recording equipment (such as a VCR or DVD recorder)
is in connection, you may use the Electronic Programme
Guide to preset TV programmes for recording.
1 Press EPG.
2 Select the desired programme ( / then ENTER ).
Viewing programme information
1 Press EPG.
2 Select the desired programme ( / then ENTER ).
Fri.02.07.04 12:46
Record
13:00-13:30 *****
*******************
Programme Information
Exit EPG Programme List RETURN
• Information about the selected programme appears.
3 Scroll the information ( / ).
• To return to the programme list screen, press
RETURN.
4 Press EPG to exit the menu.
Programme Information Fri.02.07.04 12:46
Record
22:00-23:30 *****
*******************
Rec Speed LP SP
PDC/VPS OFF ON
CANCEL OK
Exit EPG Programme List RETURN
Record?
Fri.02.07.04 12:46
Record
13:00-13:30 *****
*******************
Programme Information
Exit EPG Programme List RETURN
• Information about the selected programme appears.
3 Press the red button.
4 Select “Rec Speed” ( / ).
6 Select “PDC/VPS” ( / ).
7 Select “ON” or “OFF” ( / ).
8 Select “Record?” ( / ).
9 Select “OK” ( / then ENTER ).
10 Press EPG to exit the menu.
• Make sure to leave the VCR power on when presetting TV
programmes for recording.
• You can return to the programme list screen by pressing
RETURN.
• This function is available only when recording equipment
has been connected to the INPUT 2 or 3 terminal with the i/
o Link.A activated, using a SCART cable.
• For programmes preset (for recording) using the EPG, you
can perform deletion or change only on the recording
equipment (VCR or DVD recorder) which is a transfer
destination.
Selecting a programme for immediate
watching
Using the EPG, you can also select a TV programme currently
on air to immediately start watching.
1 Press EPG.
2 Select the desired programme currently on air ( /
then ENTER ).
Fri.02.07.04 12:46
Exit EPG
Watch
13:00-13:30 *****
*******************
Programme Information
Programme List RETURN
• Information about the selected programme appears.
3 Press the green button.
• The EPG menu is quitted and the selected TV
programme is displayed using the entire screen.
5 Select “SP” (standard) or “LP” (extended) ( / ).
PDP-505XDE-Eng (36-37) 04.6.16, 10:34 AM 37