Pioneer PDP-505HDE - Manual (Page 38)

11 Useful Adjustment Settings
38
En
Adjusting image positions and clock
manually (PC mode only)
Usually you can easily adjust the positions and clock of
images using Auto Setup. Use Manual Setup to optimise the
positions and clock of images when necessary.
1 Press HOME MENU.
2 Select “Option” ( / then ENTER).
3 Select “Manual Setup” ( / then ENTER).
4 Select the item to be adjusted ( / then ENTER).
Adjusting image positions
(AV mode only)
Adjust the horizontal and vertical positions of images on the
Plasma Display.
1 Press HOME MENU.
2 Select “Option” ( / then ENTER).
3 Select “Position” ( / then ENTER).
4 Select “H/V Position Adjust” ( / then ENTER).
Adjusting image positions and clock
automatically (PC mode only)
Use Auto Setup to automatically adjust the positions and
clock of images coming from a personal computer.
1 Press HOME MENU.
2 Select “Option” ( / then ENTER).
3 Select “Auto Setup” ( / then ENTER).
Position
H/V Position Adjust
Reset
Option
Auto Setup
Manual Setup
5 Adjust the vertical position ( / ) or the horizontal
position ( / ) .
6 Press HOME MENU to exit the menu.
• Auto Setup starts.
4 Press HOME MENU to exit the menu.
• When Auto Setup is finished, “Auto Setup completed.”
appears.
• Even when “Auto Setup completed” appears, Auto Setup
may have failed, depending on conditions.
• Auto Setup may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the PC
image and try again.
• Be sure to connect the computer to the Media Receiver and
switch it on before starting Auto Setup.
Manual Setup
H/V Position Adjust
Clock
Phase
Reset
0
0
5 Perform adjustment ( / and / ).
• Use / only when you adjust the vertical position
after selecting “H/V Position Adjust”.
6 Press HOME MENU to exit the menu.
• To restore the factory defaults for all the items, press /
to select “Reset” in step 4, and then press ENTER. A
confirmation screen appears. Press / to select “Yes”,
and then press ENTER.
• To restore the factory defaults for all items, press / to
select “Reset” in step 4, and then press ENTER. A confir-
mation screen appears. Press / to select “Yes”, and
then press ENTER.
• Adjustments are stored separately according to input
source.
PDP-505XDE-Eng (38-43) 04.6.15, 1:12 PM 38