Pioneer DV-535 - Manual (Page 14)

14
Audio Connections
This player features two digital (optical and coaxial) and
also analog audio output formats.
Digital Audio Connections:
You can enjoy the digital audio recorded on discs from
both optical digital and coaxial digital output jacks.
When making digital audio connections, do not
make connections from both the coaxial and optical
digital outputs to the same component.
When a DVD recorded in Dolby Digital, DTS, or MPEG is
loaded, noise will be output if you have made
connections via the digital audio jacks to a receiver or
amplifier that cannot decode a Dolby Digital, DTS, or
MPEG digital bitstream. In this case, be sure to set up
the Setup Navigator audio settings to best reflect the
type of system you are using (page 19). Additionally, the
digital audio settings can be adjusted manually in the
Setup screen Audio 1 menu (pages 26-27).
DIGITAL OUT (Optical)
The digital signal is transmitted as light pulses through a
fiber-optic cable.
• Use to connect to an AV amplifier or receiver with
built-in Dolby Digital, DTS, or MPEG decoder.
• Use a fiber-optic cable (not supplied) to connect the
DIGITAL OUT OPT (digital optical output) on the
player to the digital optical input on an AV amplifier or
receiver.
DIGITAL OUT (Coaxial)
The digital signal is transmitted electronically through a
coaxial cable.
• Use to connect to an AV amplifier or receiver with
built-in Dolby Digital, DTS, or MPEG decoder.
• Use a coaxial cable (not supplied) to connect the
DIGITAL OUT (coaxial digital output) on the player to
the coaxial digital input on an AV amplifier or receiver.
AV amplifier or receiver with
built-in Dolby Digital, DTS, or
MPEG decoder
COMPONENT VIDEO OUT DIGITAL OUT
AUDIO OUT
TV SYSTEM
ATTENUATOR PAL NTSC
ON OFF
AUTO
VIDEO OUT S-VIDEO OUT
VIDEO OUT SELECT
DIGITAL OUT OPT CONTROL IN
AC IN
Y PB PR
L R
DIGITAL IN
DIGITAL OUT
DIGITAL IN
Analog Audio Connection:
AUDIO OUT
• When using a microphone, connect like this.
• Make analog audio connections to a stereo amplifier
or receiver.
• Analog audio connections can also be made to a TV or
monitor with stereo input jacks.
• Use the supplied audio cord to connect the AUDIO
OUT on the player to the audio input on the stereo
amplifier or receiver.
• When making analog audio connections, be sure to
match the color of the plugs with the color of the
jacks (red and white).
COMPONENT VIDEO OUT DIGITAL OUT
AUDIO OUT
TV SYSTEM
ATTENUATOR PAL NTSC
ON OFF
AUTO
VIDEO OUT S-VIDEO OUT
VIDEO OUT SELECT
DIGITAL OUT OPT CONTROL IN
AC IN
Y PB PR
L R
AUDIO IN
AUDIO OUT
L R
L R
Stereo amplifier or receiver
AV amplifier or receiver with
built-in Dolby Digital, DTS, or
MPEG decoder
COMPONENT VIDEO OUT DIGITAL OUT
AUDIO OUT
TV SYSTEM
ATTENUATOR PAL NTSC
ON OFF
AUTO
VIDEO OUT S-VIDEO OUT
VIDEO OUT SELECT
DIGITAL OUT OPT CONTROL IN
AC IN
Y PB PR
L R
DIGITAL IN
DIGITAL
OUT
OPT