Pioneer DV-535 - Manual (Page 23)

23
GETTING ST
AR
TED USING YOUR DVD PLA
YER
Resuming playback from
where you stopped
– DVD/Video CD
Use the resume feature to restart playback from the
point that the disc was stopped last time.
Press STOP
7 once.
The display shows “RESUME” and the stop position is
memorized.
• The resume position remains memorized as long as
the disc is in the player — even if you switch the
power off.
• Pressing STOP 7 twice causes the disc to return to
the beginning when PLAY
3 is pressed again. The
display shows the disc type (DVDs or Video CDs).
Press PLAY 3.
Playback starts from the resume position.
Notes
• The actual restart position may be slightly before or after
the resume position.
• If you want to remove the disc, but still want to resume
playback from the last stopped position, use the LAST
MEMORY feature instead (page 46).
0
4
¢ 1 ¡
7
8 3
Stopping Playback and
Switching Power Off
– DVD/Video CD/CD
RANDOM PROGRAM SEARCH MODE
0 9 8 7
+10 6 5 4
CLEAR 3 2 1
1 REV FWD ¡
PLAY 3 PAUSE 8 STOP 7
e STEP/SLOW E
NEXT ¢ PREV 4
RETURN
REPEAT
CONDITION
MEMORY
LAST
MEMORY
ANGLE SUB TITLE AUDIO
SETUP MENU TOP MENU
DISPLAY
¶
5
∞
3 2
Î
¶
OPEN/
CLOSE
REPEAT
A-B
¶
¶ 5
5
5 5
EN TER
¶
¶
DVD PLAYER
3 8 7 ¡ ¢ 4 1 0
Î
STANDBY/ON
4
1
2
1
3 2
1
Press STOP
7 (7 on the front panel).
Playback stops.
2
Press OPEN/CLOSE (
0 on the front panel).
The disc tray comes out.
3
Remove the disc.
4
Press STANDBY/ON on the front panel
( on the remote control).
The disc tray goes back in.
4