Pioneer DEH-P88RS - Manual (Page 4)

3
Connecting the Units
ENG/MASTER 96 INST
4
Fuse resistor
1*
2*
4*
3*
5*
Fuse holder
(10 A)
ISO connector
Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to connect
to both connectors. Yellow/black
If you use an equipment with Mute function, wire
this lead to the Audio Mute lead on that equipment.
If not, keep the Audio Mute lead free of any
connections.
Black (ground)
To vehicle (metal) body.
Orange/white
To lighting switch terminal.
Red (4*)
To electric terminal controlled by
ignition switch (12 V DC)
ON/OFF.
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Red (5*)
Accessory
(or back-up)
Yellow (3*)
Back-up
(or accessory)
Cap (1*)
When not using this terminal, do
not remove the cap.
Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
Connect leads of the same
color to each other.
Antenna jack
Fuse resistor
15 cm
Power cable connection diagram
1_CRD4079AN_Eng 05/11/29 14:44 Page 4