Pioneer DEH-P88RS - Manual (Page 6)

5
Connecting the Units
ENG/MASTER 96 INST
6
Antenna jack
DSP switch
Switch the DSP switch as
illustration below.
ISO connector
Note:
In some vehicles, the ISO connector
may be divided into two. In this case,
be sure to connect to both connectors.
Blue/white (6*)
Blue/white (7*)
To Auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Blue/white
To system control terminal of the power
amp (max. 300 mA 12 V DC).
This product
Power cable
(For details, refer to page 3 to 4.)
Speaker leads
White
: Front left +
White/black : Front left ≠
Gray : Front right +
Gray/black : Front right ≠
Green : Rear left +
Green/black : Rear left ≠
Violet : Rear right +
Violet/black : Rear right ≠
30 cm
Connection diagram for standard mode with internal amp
1_CRD4079AN_Eng 05/11/29 14:44 Page 6