Pioneer GM-D7400M - Manual (Page 10)

9
Connecting the Unit
Connecting the Speaker Output
Terminals
• Use a 10 AWG to 16 AWG wire for the speaker
wire.
1. Expose the end of the speaker wires
using nippers or a cutter by about
10 mm to 12 mm.
2. Connect the speaker wires to the
speaker output terminals.
• Fix the speaker wires securely with the termi-
nal screws.
Using the Speaker Input
Connect the car stereo speaker output
wires to the amplifier using the supplied
speaker input wire with RCA pin cord.
• Slide the input switch to the left (SP).
7 Connections when using the speaker
input
Connecting the Speaker Wires
Connect the speaker leads according to the
figures shown below.
10 mm to 12 mm
Speaker output
terminal
Terminal screws
Speaker wire
Speaker output
Car Stereo
White: Black: Black: Red:
Left + Left ≠ Right ≠ Right +
Speaker input
wire with RCA
pin cord
To RCA input
jack of this unit.
Subwoofer